Staggered Tooth Side-Milling Cutters
For milling deep slots or cuts, you cant beat the Aber Staggered, Curved-Tooth Side-Milling Cutter. The staggered-tooth design prevents chips from interfering with the cutting action brings them out as they are removed. The practically pure shearing action puts an end to vibration and chatter and produces an exceptionally smooth cut with good finish and careful limit control. Each tooth is heavily reinforced at the point where it first makes contact with the work to absorb the shock of contact and prevent possibility of tooth corner breakage. Recommended for economical milling of many materials.
| Catalog Number | Diameter | Width Face | Size Hole | Number of Teeth |
|---|
| ST-6 | 2-1/2 | Ό | 1 | 18 |
| ST-7 | 2-1/2 | 5/16 | 1 | 16 |
| ST-8 | 2-1/2 | 3/8 | 1 | 14 |
| ST-9 | 2-1/2 | ½ | 1 | 12 |
| ST-10 | 3 | Ό | 1 | 16 |
| ST-11 | 3 | 5/16 | 1 | 16 |
| ST-12 | 3 | 3/8 | 1 or 1-1/4 | 16 |
| ST-13 | 3 | 7/16 | 1 or 1-1/4 | 14 |
| ST-14 | 3 | ½ | 1 or 1-1/4 | 14 |
| ST-15 | 3 | 5/8 | 1 or 1-1/4 | 14 |
| ST -16 | 3 | Ύ | 1 or 1-1/4 | 14 |
| ST -17 | 4 | Ό | 1 or 1-1/4 | 18 |
| ST-18 | 4 | 5/16 | 1 or 1-1/4 | 18 |
| ST-19 | 4 | 3/8 | 1 or 1-1/4 | 18 |
| ST-20 | 4 | 7/16 | 1 or 1-1/4 | 16 |
| ST-21 | 4 | ½ | 1 or 1-1/4 | 16 |
| ST-214 | 4 | 9/16 | 1 or 1-1/4 | 16 |
| ST-22 | 4 | 5/8 | 1 or 1-1/4 | 16 |
| ST-224 | 4 | 11/16 | 1 or 1-1/4 | 14 |
| ST-23 | 4 | Ύ | 1 or 1-1/4 | 14 |
| ST-234 | 4 | 13/16 | 1 or 1-1/4 | 14 |
| ST-24 | 4 | 7/8 | 1 or 1-1/4 | 14 |
| ST-244 | 4 | 15/16 | 1 or 1-1/4 | 12 |
| ST-245 | 4 | 1 | 1 or 1-1/4 | 12 |
| ST-255 | 5 | 3/16 | 1 or 1-1/4 | 24 |
| ST-25 | 5 | Ό | 1 or 1-1/4 | 22 |
| ST-256 | 5 | 5/16 | 1 or 1-1/4 | 20 |
| ST-26 | 5 | 3/8 | 1 or 1-1/4 | 20 |
| ST-265 | 5 | 7/16 | 1 or 1-1/4 | 20 |
| ST-27 | 5 | ½ | 1 or 1-1/4 | 18 |
| ST-275 | 5 | 9/16 | 1 or 1-1/4 | 18 |
| ST-28 | 5 | 5/8 | 1 or 1-1/4 | 18 |
| ST-285 | 5 | 11/16 | 1 or 1-1/4 | 18 |
| ST-29 | 5 | Ύ | 1 or 1-1/4 | 18 |
| ST-295 | 5 | 1 | 1 or 1-1/4 | 16 |
| ST-296 | 6 | 3/16 | 1 or 1-1/4 | 24 |
| ST-30 | 6 | Ό | 1 or 1-1/4 | 24 |
| ST-306 | 6 | 5/16 | 1 or 1-1/4 | 24 |
| ST-31 | 6 | 3/8 | 1 or 1-1/4 | 24 |
| ST-316 | 6 | 7/16 | 1 or 1-1/4 | 24 |
| ST-32 | 6 | ½ | 1 or 1-1/4 | 22 |
| ST-326 | 6 | 9/16 | 1 or 1-1/4 | 22 |
| ST-33 | 6 | 5/8 | 1 or 1-1/4 | 20 |
| ST-34 | 6 | Ύ | 1 or 1-1/4 | 20 |
| ST-346 | 6 | 13/16 | 1 or 1-1/4 | 20 |
| ST-35 | 6 | 7/8 | 1 or 1-1/4 | 18 |
| ST-36 | 6 | 1 | 1 or 1-1/4 | 18 |
| ST-367 | 7 | ½ | 1-1/4 | 26 |
| ST-368 | 7 | 5/8 | 1-1/4 | 24 |
| ST-369 | 7 | Ύ | 1-1/4 | 24 |
| ST-37 | 8 | 3/8 | 1-1/4-1-1/2 | 28 |
| ST-38 | 8 | ½ | 1-1/4-1-1/2 | 28 |
| ST-39 | 8 | 5/8 | 1-1/4-1-1/2 | 26 |
| ST-40 | 8 | Ύ | 1-1/4-1-1/2 | 26 |
| ST-41 | 8 | 1 | 1-1/4-1-1/2 | 22 |
| ST-42 | 10 | ½ | 1-1/4-1-1/2 | 28 |
| ST-43 | 10 | 5/8 | 1-1/4-1-1/2 | 28 |
| ST-44 | 10 | Ύ | 1-1/4-1-1/2 | 28 |
| ST-45 | 10 | 1 | 1-1/4-1-1/2 | 26 |